Kiekkojyrsin 160x18.0x32mm z=28 HSSE DIN885H ZPS 730373.16018

Type H:

Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.

Cutting edges on the face and perimeter of the side and face cutter

Tool geometry:

Helix angle = 10°. Rake angle = 10°.

Material HSSE:

Cast steel with very high performance and good toughness, applicable especially for tools of bigger diameters and side and face milling cutters.